Cheap Online Sherline Mill 5410A-CNC (Metric) Ships factory direct USA

YOU SAVE $56.00 over the price of these items purchased individually.

Sherline Mill 5410A-CNC Vertical Milling Machine CNC Ready includes 5410 milling machine

• 3 stepper motor mounts factory installed
  (Stepper motors, software, drivers and computer NOT included)
• 3013 step block hold-down set
• 3020 5/32″ hex T-driver
• 3021 3-pc. center drill set
• 3052 fly cutter
• 3060 3-pc. mill collet set
• 3072 Jacobs 1/4″ tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawbolt
• 3079 3/8″ end mill holder
• 7400 6-pc. 3/8″ shank double ended end mill set
• 3551 milling vise
• 5327 Sherline Shop Guide book (Metric P/N 5100A)

  Sherline’s most popular mill. It comes equipped with all of Sherline’s standard features upgraded to include a

• Laser engraved 12″ (305mm) solid aluminum base for 2″ or additional Y-axis travel
• Laser engraved scales on the table and base
• 2-1/2″ (63mm) adjustable “zero” handwheel on the Z-axis
• 2″ (51mm) adjustable “zero” handwheels on the X- and Y-axes
• 1297 mill headstock spacer to provide more throat distance
• 3072 1/4″ drill chuck and drawbolt
• Precision machined dovetailed slides with adjustable gibs
• Permanently lubricated spindle bearings
• Adjustable preload anti-backlash feed screws
• High-torque 90 VDC motor with electronic speed control. Speed is continuously variable from 70 to 2800 RPM without gear or belt changes.
• A second pulley position is also available to provide extra torque at low RPM if needed.
  Many other features found only on the best commercial machines.feeds calibrated in .001″ increments, a high-torque DC motor with variable speed control. The speed control is internally equipped with a converter that automatically adjusts between inputs of 100 VAC to 240 VAC, 50-60 Hz. without loss of torqueSpeed is continuously variable from 70 to 2800 RPM without gear or belt changes.A second pulley position is available for providing additional torque at low RPM

CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.

I can do all this through him who gives me strength. Philippians 4:13